13/05/2022
When is the last time you check your Gas Regulator?
Are you still using the old gas regulator which is more than 5 years?
How can you be sure that your gas regulator doesn't need to change?
With the new advanced technology, The IGT A120ISP Gas Regulator comes with:
- EXCESS FLOW VALVE (EFV)
- MANUAL RESET SHUT-OFF BUTTON
- CARRY WITH MANOMETER (LEAK & LEVEL INDICATOR)
- SAVE UP TO 20% GAS (STABLE OUTLET PRESSURE)
- ADVENCED LOCK SYSTEM (SNAP-ON DOUBLE SAFETY LOCK)
- ADVANCED FILTER
Not to mention,
This A120ISP Gas Regulator is certified by SIRIM,JKKP and CE Standard which also comes with 5 years warranty and 5 Million USD Insurance.
Shopee link:
https://shopee.com.my/product/152087219/9174854885?smtt=0.152089065-1643986057.3
https://shopee.com.my/product/152087219/12135081240?smtt=0.152089065-1643986111.3
https://shopee.com.my/product/152087219/12135081240?smtt=0.152089065-1644416309.9
LAZADA link:
https://s.lazada.com.my/s.ee3K1
https://s.lazada.com.my/s.ee1dI
https://s.lazada.com.my/s.efRPt
http://www.wasap.my/60108967767/IGTREGULATOR
47,jalan equine 9, taman equine,43300 Seri kembangan, selangor.
https://www.facebook.com/109466293919335/posts/415143416684953/
Think about safety, Think IGT
http://www.wasap.my/60108967767/IGT Regulator.
47,jalan equine 9, Taman equnie,seri kembangan ,selangor.
SIRIM APPROVED!!
http://www.wasap.my/60108967767/IGT Regulator.
NEW MODEL!!
IGT SAFETY GAS REGULATOR/DENMARK PRODUCT.
MODEL:A-120 IS
EFV -100% cut off (most of regulator in market only cut off 90% even with EFV)
100% fix gas cylinder malaysia
http://www.wasap.my/60108967767/IGT SAFETY REGULATOR
(THIS IS NEW MODEL WITH EFV SYSTEM- excess flow valve)
More Heavy duty &solid Body compare with old model(Adjustable position for gauge)
Online store:
Shopee:
https://shopee.com.my/product/152087219/4493448342?smtt=0.152089065-1631414208.3
Lazada:
https://s.lazada.com.my/s.WdjUm
Safety Advise:
✅Always install the regulator in Gas stove OFF position only.
✅In normal condition of use, in order to ensure a safe operation of installation. Its recommended that regulator should be changed every 10 years from the date of manufacturing.
✅For outdoor use, the device should be positioned or protected against direct pe*******on of trickling of water.
✅Before installation make sure that rubber gasket in cylinder valve or regulator is in good condition.
✅Make sure all taps and appliances are turned off.
✅ Use LPG cylinders in upright vertical position only.
✅ Make sure flexible pvc gas tubing is in good condition & not more than 3 years old.
✅For rubber Tubing not more than 3 years old.
❎Do not try to remove the regulator in Gas switched ON position ever.
❎Do not move the cylinder during operation.
❎Do not change LPG cylinders in the presence of candle lights of flames.
❎Do only use any tools of installation, after hand tightening the nut.
Steps For Installation:
1. Fill the regulator hose to the outlet nozzle. Use water and liquid soap for lubrication of the hose. Insert firmly and clamp it using the hose clamp.
2. In total absence of any flame remove the seal cap from the cylinder valve.
3. Press the push button horizontally, mount the regulator on the cylinder press the regulator firmly down and release.
4. Turn on by turning the lever, after ensuring that regulator is connected firmly in n the cylinder.
5. To replace the cylinder turn OFF the lever dismount by horizontally pressing push button and pull off the regulator vertically.
Low Lever Indicator-Butane/Propane...
Actual lever indication only to be observed during gas consumption from the gas cylinder to gas the appliance.
🟦Purple: The bottle is empty, not more liquid gas.
🟨Yellow: Early warning plan filling. Max, 1-2 hours use of gas.
🟩Green: Normal pressure-Gas for more then 2 hours
Inlet pressure (bar): 1~16
Nominal Outlet Pressure (mbar): 37
∆P2 (mbar): 2
∆P5 (mbar): -
Working temperature: -20~50°C
Capacity: 1.5kg/h
Inlet connection: G.52-20mm, G.53-21mm, G.54-22mm, G.59-27mm
Outlet connection: H.4,H.50,H.51,H.53
Excess flow: yes
Regulator: 63mm
Leak & lever indicator: yes
