Intatec

Inta - the anti-scald tap, valve & shower manufacturer - follow us for news, info & the occasional free giveaway.

04/09/2026

Installers, the new Non Concussive Basin Tap is in stock now with a pre-installed 4 l/min flow regulator.

Think 4 l/min sounds low? Have a look at it in action. 👇

As the video shows, you’ve still got the right flow for a proper hand wash, without wasting water or splashing it around the basin. And because it’s regulated to 4 l/min, the tap can achieve a higher score within efficiency schemes too.

Save water. Save energy. Save money. Fit Inta.

🔗 https://www.intatec.co.uk/products/nc600cp/

03/09/2026

On a washroom refurb? The new Non Concussive Basin Taps by Inta are in stock now. 🆕

- 15 seconds ±5 automatic self-closing operation
- Helps save water and energy
- Helps reduce running costs

And at 4 l/min, you’ve got the right flow for a proper hand wash without chucking water away.

A simple solution for controlled daily water use.

Save water. Save energy. Save money. Fit Inta.

👉 https://www.intatec.co.uk/products/nc600cp/

31/08/2026

You know how a heat pump works. But what happens when there’s still a boiler in the mix?

This quick video breaks down Hydra.

Even if you’re not fitting hybrids yourself, it’s worth knowing what you’re looking at if you come across one on a job, or if a customer’s got a decent boiler they’re not ready to lose. 👇

28/08/2026

Need to service the expansion vessel? Why drain the whole system?

The new Intafil Combi lets you isolate and drain the vessel on its own, so servicing or replacing it doesn’t mean a full system drain-down, refill and bleed afterwards. The inhibitor stays in the system too.

And when you’re fitting it, the filling loop, gauge, isolation and drain are all together in one compact unit, with fewer joints and less pipework to put together.

Drain the vessel. Not the system.

🔗 intatec.co.uk/intafil-combi

26/08/2026

Good heat pump protection comes down to whole-system thinking.

Inta Zero anti-freeze valves, K-Type ball valves, the IntaKlean heat pump filter, and IntaFlex hoses all have a job to do. Add the right pressure vessel and buffer support from Zilmet UK, and the system is better protected from the start.

🔗 intatec.co.uk

24/08/2026

Inta Zero isn’t designed to be the cheapest AF valve on the shelf. Getting anti-freeze protection right takes proper investment - tooling, dedicated machinery, extensive testing, patent-pending design work and the materials needed to perform reliably.

Price matters, but so does knowing you’ve fitted something you can stand behind long after the job’s done.

Find Inta Zero at your favourite merchants.

21/08/2026

𝗡𝗼𝘁 𝗲𝘃𝗲𝗿𝘆 𝗵𝗼𝗺𝗲 𝗶𝘀 𝗿𝗲𝗮𝗱𝘆 𝘁𝗼 𝗴𝗼 𝗳𝘂𝗹𝗹 𝗵𝗲𝗮𝘁 𝗽𝘂𝗺𝗽.

What about the customer with a perfectly good boiler that might have another 10 years left in it?

As our CEO Stuart Gizzi puts it: “They’re unlikely to throw that boiler away tomorrow. But they could start cutting their gas use by adding a heat pump.”

That’s where hybrids come in. And if you work with heat pumps or boilers, they’re worth knowing about.

10/08/2026

Our thermostatic mixing valves are built to be relied on, with TMV2 and TMV3 approvals and proven performance that supports safety measures long after handover.

31/07/2026

Not every home is the right fit for a full heat pump.

One of the conversations at InstallerSHOW was what happens when the homeowner still is not ready to go all-in?

That is where a heat-pump-led hybrid can offer another option, allowing the heat pump to do the bulk of the work, with the boiler there when needed.

Would you consider a hybrid when a full heat pump job is not going ahead?

29/07/2026

Keeping sludge and debris out of a heat pump system is nothing new. Making the filter easy to service is where the IntaKlean HP earns its keep.

Its body rotates 360 degrees, so you can turn it to fit the space and still get easy access to the drain-down point when it is time for a service. 🔄

A preformed insulation jacket is also available to help keep heat in the system.

Are you using the IntaKlean HP on your heat pump installs?

Address

Airfield Industrial Estate
Stafford
ST180PF

Website

http://www.intatec.co.uk/

Alerts

Be the first to know and let us send you an email when Intatec posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Intatec:

Want your business to be the top-listed Restaurant in Stafford?